Cart is empty
8.9 Inch LCD Screen for Acubic Photon Mono X 8.9 inch, 4K 3840×2400 Resolution, Print Screen Replacement PJ089Y2V5 Fit Tm089cfsp01 Accessories
Sale!$127.99 $129.99
1. compatible 8.9 Lcd Fit Photon Mono X 3D LCD printer. With accessories
2. Size: 8.9-inch screen, resolution: 4K 3840×2400
3. Packaging and transportation: LCD screens are packed in solid boxes, so that our products can be delivered under perfect conditions!
4. Please ensure that you check the original model number for accuracy or contact us for the most professional advice. Regarding packaging, we provide professional packaging with soft material to ensure the safe arrival of the screen at its destination.
5. Our team has more than 10 years experience, if you encounter problems, please contact us, we will reply within 24h.
1. compatible 8.9 Lcd Fit Photon Mono X 3D LCD printer. With accessories
2. Size: 8.9-inch screen, resolution: 4K 3840×2400
3. Packaging and transportation: LCD screens are packed in solid boxes, so that our products can be delivered under perfect conditions!
4. Please ensure that you check the original model number for accuracy or contact us for the most professional advice. Regarding packaging, we provide professional packaging with soft material to ensure the safe arrival of the screen at its destination.
5. Our team has more than 10 years experience, if you encounter problems, please contact us, we will reply within 24h.
Specification | Data |
|---|---|
| Model： | PJ089Y2V5 |
| Size | 8.9Inch |
| Interface/Resolution | 50Pin/4K 3840×2400 |
| Compatible printer | compatible 8.9Lcd Fit Photon Mono X 3D LCD printer |
| Weight | 1 kg |
|---|---|
| Dimensions | 33 × 23 × 6 cm |
Annika Vega –
This screen was packaged to survive a cliff dive. Installation was a breeze, my prints are printing without any changes to exposure settings. Very happy, would recommend!
Carlasce –
Ordered the PJ089Y2V5 8.9″ model.
(Shipped and Delivered in 1 Day :D)
The screen was packed perfectly in bubble wrap and neatly tucked into it’s box.
Kit came with:
1x Screen,
1x Adapter board and cables(not necessary in my case),
1x 64GB USB Flash Drive with installation video,
Installation is simple.
Unplug the unit, remove the protective tape around the screen, pop off the metal panel below the screen, clean off the adhesive from the old display and put the new display in its place.
You’ll need to replace the tape around the screen on the outer edges or just slap an oversize screen protector on top of it and get 2 birds stoned at once.
Samuel Greco Jr –
Exact fit replacement for my Mono X 3D printer. Very easy to install and had everything I needed for the replacement.
Viera Fran –
My prints were starting to fail due to a small crack and resin getting underneath my old screen. My husband just replaced it with a new one and it works perfectly!! My prints are coming out amazingly with it! I have a Creality LD 006.